Product PortfolioProduct GuaranteeProduct Query Form      
 


          
                             

SLAB CUTTING MACHINE

Technical Specifications of Machine
2.5 Mtr. 3.0 Mtr.
beam Length 500 RPM 400 RPM
Blade Cross Movement 1500 MM 1500 MM
Blade Vertical Movement 400 MM Dia 350 MM Dia
Blade Motor Power 6 Nos. 2 Nos.
Cross Travl. Motor Power (D.C.) 7.5 H.P. 7.5 H.P.
Maximum Allowable blade Dia 6'x10' 5'x10'
Spindle Diameter 150 mm 150 mm
Max. Working with Ruph-Block (L) 9'-6* 11'-0*
(W)
 6'-0* 6'-0*
(H)
 6'-0* 6'-0*
Max. Working output with slab 1025 (3'-4') 1275 (4'-2')
Flenge 450 450
Working Table (Trolley) (L) 2750 mm 2850 mm
(W)
 1350 mm 1450 mm
Gross Weight of Machine approx (in kgs.)
Water
 12.500 16500
Kerosene
 17000 22000
Standard Voltage and Frequency 415 volts 3 ph 50 Hz
Max. Permissible Step Cutting Depends on diamond Cutter
Their Quality and Block's Hardness
Others
Cutting speed 00.14 min <30.00 min
Trolley type 45 Degree "V" Wheel Motirised Optional
Dual Speed Available on Request
Coolant Water/Kerosene
Operating system Automatic Process Cutting
Panel Presetable, Also Equipped with *PLC* Panel Available
Note :
This Technical Data may be used for guideline of production.
We reserve the rights to introduce any technical modification to machines for improvement.
Therefore any Data given on the catalogue has only indicative value.

 

 

 

 

 

 

 

Special Features

Fast Up-Dn of Beam/Bridge.
Highest Production with minimum Maintenance.
Low Power Condumption.
Extra large cutting & more margin in both sides.
More tool life with minimum consumption of Coolant.
Easy block setting by Panel, operator can set all sizes from the ground and Panel.
97% Load transmission through dynamic balanced counter Pulley.
Sell of Lubrication. No overflow of oil in both side of Beam.
Grind finished 45 "V" Shaped Rails and oil seal protected trolley wheels.
Rotary limit switch Torlley.

buy Humor Posters at the website!
Technical Specification of Machine
Beam length 22 feet
Blade Cross Movement 5300 mm
Blade Vertical Movement 2350 mm
Blade otor Power 50.0 hp
Bridge Motor Power 5.0 hp
Cross Travl. Motor Power (D.C.) 3.0 hp
Maximum Allowable blade dia 3500 mm
Spindle Diameter 175 mm
Max. Working with Ruph-Block (L)
 12'
(W)
 6-0"
(H) 6-6"
Max. Working output with slab 1500 (4' 11")
Flenge 500
Working Table (Trolley) (L)
 3000 mm
(W)
 1500 mm
Gross Weight of Machine approx
Water
 23000
Kerosene
 29000
Standard Voltage and Frequency 415 volts 3 ph 50 Hz
Max. Permissible Step Cutting Depends on diamond Cutter. Their Quality and Block's Hardness
Others
Cutting speed 00.14 min < 30.00 min
Trolley type 45 Degree "V" Wheel Motirised Optional
Dual Speed Available on Request
Coolant Water/Kerosene
Operating system Automatic Process Cutting
Panel Presetable, Also Equipped with "PLC" Panel Available